Activate Alarm; Silence Alarm; Temperature And Humidity; Select Temperature Unit - Oregon Scientific RMR613HGA User Manual

ACTIVATE ALARM

Press ALARM to switch to Weekday or Single Alarm view.
To activate or deactivate the alarm, press UP or DOWN.
• Alarm deactivated: --:--
• Alarm activated: Alarm time is shown
The bell icons and
W S
mode selected.

SILENCE ALARM

When the Alarm time is reached, the crescendo alarm
will sound for 2 minutes. Press ALARM to silence it.
The Weekday Alarm will sound at the same time the
next day provided the next day is Monday - Friday. The
Single Alarm will not sound unless you manually activate
it again.
RMR613HGA lab test R2
indicate the alarm display
10
10

TEMPERATURE AND HUMIDITY

This product can display the following information from
the remote sensors:
VIEW BAROMETER AREA
• Current, minimum, and maximum temperatures
and relative humidity percentages.
• Comfort level
Data is collected and displayed every 40 seconds.

SELECT TEMPERATURE UNIT

Slide the °C / °F switch into the desired location. The
switch is located in the battery compartment. The setting
for the main unit overrides the remote sensor setting.

SELECT SENSOR CHANNEL

Press CHANNEL to switch between sensors 1 - 3.
The icon shows the selected sensor.
1/17/04, 5:00 PM