Turn Atomic Clock On/Off; Set Clock; Switch Clock Display; Alarms - Oregon Scientific RMR613HGA User Manual

TURN ATOMIC CLOCK ON/OFF

Perform this step if you cannot receive Atomic Clock
signals. Press and hold DOWN for 2 seconds. Then,
manually set the clock following the "Set Clock"
instructions (below).
The signal icon indicates that the Atomic Clock
feature is ON. No icon means that it is OFF

SET CLOCK

You only need to do this if you have disabled the Atomic
Clock feature (for example, if you are too far from or
cannot receive a signal).
1. Press and hold MODE for 2 seconds. The Clock
Area will blink.
2. Select the offset hour, 12 / 24 hour format, hour,
minute, year, month, day, and language. Press UP
or DOWN to change the setting. Press MODE to
confirm.
The language options are (E) English,
NOTE
(F) French, (D) German, (I) Italian, and (S) Spanish.
RMR613HGA lab test R2

SWITCH CLOCK DISPLAY

Press MODE to toggle between Clock with Seconds,
Clock with Weekday and Calendar, and Clock with Offset
Hour display.

ALARMS

This product has 2 alarms: a Single Alarm and a Weekday
Alarm. The Single Alarm can be set to go off at a specific
time for a one-time event (for example, if you are napping
on Saturday). The Weekday Alarm will sound at the same
time Monday - Friday (but not on weekends).

VIEW ALARM SETTINGS

Press ALARM to display the Alarm settings you wish to
view: Weekday

SET ALARM

1.
2.
3.
9
9
W S
or Single .
Press ALARM to display the type of Alarm you wish
to set: Weekday or Single.
Press and hold ALARM for 2 seconds. The Alarm
settings will blink.
Select the hour and minute. Press UP or DOWN to
change settings. Press ALARM to confirm.
1/17/04, 5:00 PM