Table of Contents
Advertisement
Kinetic-
wave
Icon
Designat-
Remote
Indoor
ed
Display
Display
Display
Channel 1
To auto-scan between sensors, press and hold
CHANNEL for 2 seconds. Each sensor's data will be
displayed for 3 seconds. To end auto-scan, press
CHANNEL or MEM.
NOTE
If you use a sensor that collects only
temperature data, humidity will not be shown.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the selected sensor. To
clear the records, press and hold MEM for 2 seconds.
A beep will sound to confirm that the memory has been
cleared.
COMFORT ZONE
The Comfort Zone indicates how comfortable the climate
is, based on current temperature and humidity
measurements.
RMR613HGA lab test R2
ZONE
Remote
Remote
Display
Display
Channel 2
Channel 3
This information is shown in the Humidity Area when
the current measurement is displayed.
RESET SYSTEM
The RESET buttons are located in the battery
compartment for the main unit and sensors. Press
RESET when you change the batteries and whenever
performance is not behaving as expected (for example,
unable to establish radio frequency link with remote
sensor or radio-controlled clock).
NOTE
to default value, and you will lose all stored information.
11
11
TEMPERATURE
HUMIDITY
>70%
Any
20 – 25 ° C
40 – 70%
(68 - 77 ° F)
<40%
Any
When you press RESET, all settings will return
1/17/04, 5:00 PM
Hide quick links:
Advertisement
Table of Contents
