Assembling The Unit; Positioning The Handlebars - Craftsman Incredi-Pull 316.292640 Operator's Manual

CRAFTSMAN TWO YEAR LiMiTED WARRANTY
When operated and maintained according to all supplied instructions, if this Craftsman product fails due to a defect in material or workmanship
within two years from the date or purchase, take it to any Sears or other authorized Craftsman location in the United States for free repair.
Call 1-800-4-MY-HOME® for the nearest authorized location.
This warranty applies for only 90 days from the date of purchase if this product is ever used for commercial or rental purposes.
This warranty covers ONLY defects in material and workmanship. Sears will NOT pay for:
= Expendable items that become worn during normal use, including but not limited to blades, tines, or belts.
• Tire or wheel replacement or repair resulting from normal wear, accident, or improper operation or maintenance.
• Repairs necessary because of operator abuse, including but not limited to damage caused by impacting objects that bend the frame or
motor crankshaft.
• Repairs necessary because of operator negligence, including but not limited to, electrical and mechanical damage caused by improper
storage, or failure to maintain the equipment according to the instructions contained in the operator's manual.
• Repairs necessary due to improper fuel mixture, contaminated or stale fuel.
• Normal deterioration and wear of the exterior finishes, or product label replacement.
This warranty applies only while this product is within the United States.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179
APPLICATION On/Off Switch
• Cultivating sod and light to medium soil
Cultivating in garden areas, around trees, etc. Grip
irotUe C_ontrol
Starter
Rope Grip
Transport Fuel Cap
Grip
Tine Shield Handlebar
Knob
Tines
Primer
Wheel Bracket
Assembly
Spark Plug Muffler
Air Filter/
Muffler Cover
ASSEMBLING THE UNIT
Before operating, position the unit's handlebars.
NOTE: You may also need to reposition the wheel height before
using the cultivator. Refer to the Adjusting Tine Depth section.
Begin by carefully unpacking the contents and making sure that
nothing is damaged.
POSITIONING THE HANDLEBARS
1. Loosen the two knobs on the inside of the handlebars (Fig. 1).
2. With the unit upright, swing the handlebars up into the
operating position (Fig. 9).
NOTE: Take care not to pinch the throttle cable or switch wires
when positioning the handlebar.