GE PTS25LBMBRBB Owner's Manual And Installation Instructions page 7

vvww.GEAppliancescem
Slide-Out Spillproof Sheff (on some models)
The slide-out spillproofshelf allows you
to reach items stored behind others. The
_pecial edges are designed to help prevent
spills from dripping to lower shelves.
Toremove:
O Renmve 'all itezrLsfrom sheik
Slide tile sheffout until it StOl_S.
Lift the front edge of die shelf ttnfil the
cenuul tabs"are above the front bar.
Continue pulling the shelf forward tmtil
it can be removed.
Toreplace:
Place the rear shelf tabsjus! in front of
the central n ut_'hes on _he shelf ii-,une.
_ Slide flee shell'in un til the cenu;al tabs
are slightly behind the fix)nt bat-.
Lower the shelf lind place tm til it kg
horizontal and slide flee shelf in.
Makesurethat the shelf sits flat after reinstallation
anddoesn'tmovefreelyfrom side to side.
Make sureyoupush rite shelvesall the wayin
beforeyouclose_e deer.
.....
Adjustable Bins on the Door
Adjuslable bil_s (;all easily be carried from
refrigerator to va)rk area.
Toremove: Ihfi hie stvaight up, then pull out.
Toreplace orrelocete: E_zgage the hh_ in the
molded supports of the dc_)r, and push hz.
Bin will lock in place.
Thesnuggerhelps prevent tipping, _illing
or slkting of small items stored on the tk×)r
,shell'. (;tip the finger hold near the rc_ar of
the snugger and move it u) fit your nec_ls.
Non-Adjustable Shelves on the Door
T0remo_:lJfttheshelfstraightupthen
pull nut.
To replace: Engage the shelf in the molded
supports on the d_x_r mad push down. h will
hx'k in place.
Freezer Tilt Out Bin (onsomemodels)
lkzsh the buuon ms)x)u flit out the bin.
Toremove: Hold the skies of the bin and litt
it straight up, d_en pull out.
To replace: Engage the ends of the bin in
the molded suplx)rts on the door and push
dowll. It will lock in place.
NOTE: Do not overloadthe bin.
7