GE PTS25LBMBRBB Owner's Manual And Installation Instructions page 20

Installation Instructions
REVERSING THE DOOR SWING
(CONT.)
[] TRANSFER BOTTOM HINGE
BRACKET TO THE LEFT
Remove Ihe hase gaille by pullingit straight out.
Using a Torx [)river, move tile bottom hinge bracke_
fronJ the right fide to the left sMe.
NOTE: If the _t_her is not on die hinge hcacket, check u)
see if it is stuck to the bottora of the dcxm
[] TRANSFER CENTER HINGE
BRACKET TO THE LEFT
Remove the center hinge bracket hy removing file
three Torg screws
NOTE: Keep them _'rews vAth the hinge bracket.
They are Iotlg screws and _dll be used wben installirg
tile [tinge on the other side,
You will need to remove the (xflor-matc.hed cap from
the ,screw head before you can remove the .serew. Use
the edge of a thin flat blade to gently pry the caps off
the screw heads. (A pn t_, knKe works well for tills.)
Cover the blade wifll tape re)prevent scratching the
paint.
Remove tbe mullion cover from the left side using
the thin flat blade. Assemble it to the right side.
Remove the Torx screw from the center left side
of the cabinet. Screw it into tbe boles on the
,igbt side.
Place the center hinge bracket over the hol_s at the
center left fide of the cabinet. Insert and tighten
tile three long screws.
Replace tile cap by snapping it over the _rew'Mth
yottr finger.
MullionCover
[] RANSFER DOOR STOPS
On each door. move the metal d(_n" stop from die
right to the left.
Move ally sc_rewsfit)In the left to die right.
2O