GE PTS25LBMBRBB Owner's Manual And Installation Instructions page 18

Installation Instructions
REVERSING THE DOOR SWING
IMPORTANT NOTES
When reversing the door swing:
• Read the instructions all tile _-ay through before
starting.
• Handle parts carefully to avoid scratcbing paint,
• Set screws down by their related parts m avoid ufing
them in the wrong places,
• Provide a non-scratching work surface tbr
the doors,
IMPORTANT: Once you begin, do not move the
cabinet until door-swing reversal is completed.
These instructions are for changing d}e hinges ti'om
file right side to the left side--if you ever want m change
the hinges back to the right side, folh)w these same
instructions and reverse all retErences to left and right.
Unplug the refrigerator from its electrical outlet.
Empty all door shelves, including the dairy
compartment.
TOOLS YOU WILL NEED
Phillips screwdriver
3/4" Head socket driver
Is 6-point socket is
recommended}
Masking tape
[20 or 125 Torxddver,
whichever your model
requires
Puttyknifeor
thin-blade screwdriver
[_REMOVE THE FREEZER DOOR
Tape the door shut with masking tape.
Remove the hinge cover on top of the fre(2er dnor
(on some models).
Remcwe tbe two Torx screws, then rift the hinge
sU'aigb t up to flee the hinge pin fi'om the scx:ket in
die trip of the door.
Remove die tape and tilt the dm)r away front the
cabinet. Lift it off the center hinge pin.
Set the door on a non-scratching surface with
the inside up.
18