Advertisement
7. Locatethe bevelindicatorandt0-32 x 3/8"long
panhead screw in loose parts bag.
8. Usea #2 phillips screwdriver to attachthe bevei
indicatorto the backof the frame,in the smalI
recessbelowtile trunnion, w iththe 10-32x 3/8"
screw.
9.Alignthe bevel i ndicator w iththe "0"degreemark
onthetrunnion andtighten thescrew
INSTALLING
THE HOSE CUP
1. Locate
the Hose Clip in the loose
parts bag
Identify the barbs on the clip.
Barbs
2. Open the front cover of the saw by pulling forward
on the finger hold located on the left side of the
band saw. Locate the notch in the Frame at the
sawdust ejection port.
Notch
/
3. Position the Hose Clip with the barbs to the back
side of the band saw. Slide the Hose Clip into the
notch. Push the clip until it is fully seated on the
Frame. The Hose Clip will secure a Wet/Dry vac
hose in place for sawdust collection.
Hose Clip
13
Advertisement
