Laser Assembly - Craftsman 152.229000 Instruction Manual

Figure 5-7 Figuce 6°2
©
D
F
E
C
9,
Position the adhesive cord champs (Q) onto drHi
press so that they wHi keep the Hightcord dear
of the working area of your drHi press,
See Figure 5-7,
LASER ASSEMBLY
2, Remove battery cover (C) from Maserhousing,
3, Connect a 9-voit battery (D) (not inciuded) to
battery termina] (E),
4, Piace battery into battery compartment (F) and
repiace battery cover,
MAKE CERTAIN the drill] press is disconnected from
the power source,
LASER LIGHT - DO NOT STARE INTO BEAM,
APERTURE, or into a reflection from a mirror-Hike
surface,
Figure 6-3
Figure 6-1
\
Piace champ (A) through openings (B) in iaser
housing,
5,
6,
Place laser around column (G) and against the
head casting (H) and fasten the clamp securely at
the column,
Make sure laser housing is positioned that one
laser is to each side of the head casting,
16