Craftsman 113.198610 Owner's Manual page 15

11.Securerearof lowershelf to right sideandleft
sidepanelsusingtwo (2)1/4-20x 1/2trusshead
bolts, Iockwashers and hexnuts. Handtighten
nutsonlyatthis time.
12. Lay the stand on the backside, locate two (2)
spacers, two (2) 1/4-20 x 1"truss head bolts,
Iockwashers and hex nuts. Assemble the spacers
between each of the foot assemblies and the
lower shelf on each side with one (1) truss head
bolt, Iockwasher and hex nut each as illustrated.
Hand tighten nut.
SHELF
SIDE PANEL
J
l'_ r--
SPACER
1/4-20 x 1
13.
Locate the four (4) swivel casters and sixteen
(16) 1/4-20 x 7/16 slotted truss head bolts,
Iockwashers, and hex nuts. Line up the caster
with the matching holes in lower shelf and corner
bracket (shaded area). Attach the caster with
four (4) slotted truss head bolts, Iockwashers
and hex nuts and tighten by hand as illustrated.
When all four bolts are installed use a regular
screwdriver and a 7/16" wrench or socket to
tighten securely. Repeat procedure for the three
remaining casters.
l
1/4"-20 x 7/16"
LOCKWASHER
HEX NUT