Operation - Craftsman 113.177460 Owner's Manual

Vac Assembly ......
1. Line up deflector on top portion of vac
with the vacuum inlet of the drum,
2. Position the handles with flexible latches
over the locking tabs on the drum. Press
down on the handles until the flexible
latches snap over the tabs on the drum.
NOTE: Latches will not snap on if top
portion of vac assembly is on backwards,
or not aligned properly.
3. Push end of hose into vacuum inlet of
dust drum.
4. Push rectangular nozzle onto end of
hose.
5. Familiarize yourself with the controls and
features of your vac.
Switch
Con Wrap
Area
Vacuum
Ud Handle
Dust Drum
Caster Feet
w/Accessory
Storage
Handle
Channel
--- =
Top Assembly ipus h
Down
Pu.lout
Flexible
Locking
End
Flexible Locking Tabs
Opening
Power
Nozzle
The hose lock is designed to make storage
of your vac more convenient. Simply wrap
hose around power head, and attach as
illustrated. Larger opening should be toward
open end of hose for easy release.
NOTE: Hose lock not provoided on all
models
Open End
Of Hose
Hose Lock
Operation
WARNING
To avoid fire or explosion, do not operate this vac in areas with flammable gases
or flammable vapors such as lighter fluid, cleaners, oil-base paints, gasoline,
alcohol or explosive dust such as coal, magnesium, grain or gun powder in the
air. Do not vacuum explosive dust, flammable or combustible liquids or hot
ashes. Do not use this vac as a sprayer for any flammable or combustible liquid.
To avoid health hazards from vapors or dusts, do not vacuum toxic materials. To
avoid electrical shock do not expose to rain. Store vac indoors. Unplug power
cord before changing or cleaning filter or emptying the dust drum.