Table of Contents
Advertisement
r
Save This Manual
For Future Reference
SEA/IS
owner's
manual
MODEL
NO.
113.177810
Serial
Number
Model and serial
numbers may be found
on the back of the motor
cover. You should
record both model and
serial numbers in a safe
)lace for future use.
FOR YOUR
SAFETY
READ ALL
INSTRUCTIONS
CAREFULLY
CRRFTSMRN
6 GALLON
WET/DRY VAC
• assembly
• operating
• repair parts
Pa_ No. SP6022
Sears, Roebuck
end C.O.=Hf_ilHan
Estates,
IL. 60179 U.S.A.
Advertisement
Table of Contents
Related Manuals for Craftsman 113.177810
Summary of Contents for Craftsman 113.177810
- Page 1 Save This Manual For Future Reference SEA/IS owner's manual MODEL 113.177810 CRRFTSMRN Serial Number Model and serial 6 GALLON numbers may be found on the back of the motor WET/DRY VAC cover. You should record both model and serial numbers in a safe )lace for future use.
-
Page 2: Important Safety Instructions
FULL ONE YEAR WARRANTY ON CRAFTSMAN WET/DRY VACS If within one year from the date of purchase, this Craftsman Wet/Dry Vac fails due to a defect in material or worWnanship, Sears will repair it, free of charge. If this Craftsman... - Page 3 To avoid falls, use extra care when clean- To avoid injury from accidental starting, ing on stairs. unplug pow.er cord before changing or This Wet/Dry Vac is double-insulated, cleaning filter. Do not unplug by pulling on cord. To eliminating the need for a separate grounding system.
- Page 4 odwctfion _wnerr's _/Manual Contents le_/{)ryy V _-=_,isinteendead _ ?nousea- ttet-n Page IM I:P. O IR_,ANT_NC_'rE W_n_nty Inf_orrn_ation ......- Sa_--_d " Instru_cticons ......... Pleasse Rmad C_armf_ In_-or_uction ..........Shoc_ks CocTmmom - _mory Ur_e.c:king _nd 'Checking _r wneen t_,rr_'rv_ hu_midt_ of thee _---'arton _omtents ......
-
Page 5: Float/Cage Assembly
Float/Cage Assembly the filter cage and the center ring of the WARNING: For your own safety, lid. Pry the tab out of the slot. Tilt the cage never connect plug to power source and lift away from the lid. To replace, fol- outlet until all assembly steps are low float/cage... -
Page 6: Vac Assembly
Vac Assembly hose, which is opposite the swivel end, 1. Line up motor cover label above vac- into the vacuum port on the front of the uum port (located on the front of the drum. drum). 7. Place the utility nozzle securely on the 2. -
Page 7: Operation
Operation WARNING To avoid fire or explosion, do not operate this vac in areas with flammable gases, vapors or explosive duet in the air. Flammable gases or vapors include but are not limited to; lighter fluid, solvent type cleaners, oil-base paints, gasoline, alcohol... -
Page 8: Emptying The Drum
Emptying the Drum Cord Wrap When vacuuming is complete, unplug the cord and wrap it around the handie, accidental starting, unplug power ARNING: To avoid injury from cord before emptying the drum. 1. To remove power assembly to empty contents of drum, simply pull the flexi- ble latches outward on each side of the power assembly to release from the... -
Page 9: Maintenance
Maintenance Filter 2. For best cloaning results due to accu- mulated dust, clean the filter in an open area. Cleaning SHOULD be done out- dental starting, unplug power cord doors and not in the living quarters. ARNING: To avoid injury from acci- before changing or cleaning filter. -
Page 10: Repair Parts
Repair Parts 6 Gallon Wet/dry Vac Always order by Part Number - Not by Key Number Model Number 113.177810 WARNING SERVICING OF DOUBLE-INSULATED WET/DRY In a double-insulated Wet/Dry Vac, two systems of insulation are provided instead of grounding. No grounding means is provided on s double-insulated appliance,... - Page 11 Repair Parts 6 Gallon Wet/dry Vac Model Number 113.177810...
- Page 12 For the repair or replacement parts you need Call 7 am - 7 pro, 7 daysa week 1-8OO-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day,7 daysa week 1-8OO-4-REPAIR (1-800-473-7247) For the location of a SearsRepair Service Center in your area Call 24 hoursa day,7 days a week 1-800-488-1222 For information on purchasinga Sears...