Maintenance Schedule; General Recommendations; Before Each Use; Lubrication Chart - Craftsman 917.296030 Owner's Manual

MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Inspect Spark Arrester / Muffler I_
Inspect Air Screen I_
Clean or Replace Air Cleaner Cartridge 1_2
Clean Engine Cylinder Fins I_
Replace Spark Plug If
RH Gear Case Grease Fitting (1oz.)
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to op-
erator abuse or negligence. To receive full
value from the warranty, the operator must
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check tines and belts for wear. A
new spark plug and clean air filter as-
sure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check tine operation.
3. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
@Throttle Control
@Engine ®RH Gear Case
Grease Fitting
3th Stake Pin
@Idler
Bracket @Wheel Hub
@Leveling
Shield
Hinges
@ SAE 30 OR 10W-30 Motor Oil
@ Refer to Maintenance "ENGINE" section
® EP#1 Grease
13