Maintenance Schedule - Craftsman Sears 900 Series Owner's Manual

MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Engine Oil Level
Change Engine Oil
Oil Pivot Points
Inspect Spark Arrester / Muffler
Inspect Air Screen
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins
Replace Spark Plug
RH Gear Case Grease Fitting (1oz.)
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have
been subjected to operator abuse or negligence. To receive
full value from the warranty, the operator must main tain
tiller as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain your tiller.
All adjustments in the Service and Adjustments section
of this manual should be checked at least once each
season.
• Once a year you should replace the spark plug, clean
or replace air filter, and check tines and belts for wear.
A new spark plug and clean air filter assure proper air-
fuel mixture and help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check tine operation.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRICATION CHART").
MAINTENANCE
1,2
2
BRACKET
SAE 30 OR 10W-30 MOTOR OIL
REFER TO MAINTENANCE "ENGINE" SECTION
EP #1 GREASE
12
SERVICE DATES
LUBRICATION CHART
ENGINE
RH GEAR CASE
GREASE FIT TING
IDLER
WHEEL
HUB
THROTTLE CONTROL
DRAG
STAKE PIN
DEPTH
STAKE PIN
LEVELING
SHIELD
HINGES