Advertisement
mounting the scromlsaw to
1.
When mounting
this saw to a workbench
a solid
wood bench is preferred
over a plywood
bench where
noise and vibration will be more noticeable.
2.
Hardware to mount this saw to a workbench is
supplied
with the saw.
However,
we recommend
the
hardware used be no smaller than the following.
Description
Qty.
Hex Head Screws, 114-20 x length required ..............
3
Flat Washers, 1/4 I.D ...............................................
6
Lock Washers, 1/4 I.D .............................................
3
Hex Nuts, 1/4-20 ....................................................
6
3.
A soft foam pad to place between your scroll saw
and workbench is NOT supplied with the saw. However,
we highly recommend the use of such a pad to reduce
noise and vibration.
Description
Qty.
Soft foam pad such as carpet padding,
24"x
12 "x
1/2". ...............................................
1
Do NOT over tighten mounting bolts - leave some
cushion
in the foam
pad
for absorbing
noise
and
vibration.
a bench
SCROLL SAW BASE
HEX HEAD SCREW_
WORKBENCH /
SCROLL SAW BASE
HEX HEAD SCREW_,
FLAT WASHER _
1/2" FOAM PAD_
(OPTIONAL)
_
_
S! DE VIEW
WORKBE.C.
, ,
J-
FLAT WASHER _::i
" -ii_ _-:.:; " : i
4.
If you prefer to mount your saw to a leg set, we
recommend
the leg set for bench top tools which is
available through Sears Retail or Catalog Stores. The
number of this leg set is 9-22244. This leg set is an
accessory
and instructions
to mount the
scroll saw to this leg set are included
in the leg set
package.
12
Advertisement
