Unpacking - Craftsman NEXTEC HAMMERHEAD 320.30261 Operator's Manual

_, WARNING: Always remove the battery from the auto-hammer before
assembling parts, making adjustments, installing or removing bits, cleaning, or
when it is not in use. This will prevent accidental starting, which could cause
serious personal injury.
When unpacking the box, do not discard any packing materials until all of the
contents are accounted for:
1.
2.
Carefully lift the auto-hammer out of the carton and place it on a stable, flat
surface.
Open the carton to locate the following:
• Pry bar
• Battery pack
• Charger
• Manual
3. Inspect the items carefully to make sure that no breakage or damage has
occurred during shipping. If any of the items mentioned is missing, return the
auto-hammer to your nearest Sears store to have the auto-hammer replaced.
A_, WARNING: If any part is broken or missing, do not attempt to assemble
the hammer, attach the battery pack, or operate the hammer until the broken or
missing part is replaced. Failure to do so could result in possible serious injury.
30261 manuaLRevised_11-0303 Page 9