Craftsman 536.292524 Operator's Manual page 6

ASSEMBLY
ASSEMBLY
PARTS PACKED SEPARATELY
IN CARTON
1 - Owner's Manual (not shown)
1 - 5.3 oz. 2-cycle Oi!
1 - 5.3 oz. 2-cycle Oil
WARNING: Always wear safety
glasses or eye shields while as.
sembling the cultivator.
Figure 1 shows the cultivator completely as-
sembled.
References to the right or left side of the cul-
tivator are from the viewpoint of the opera-
tor's position behind the unit.
HOW TO REMOVE THE
CULTIVATOR FROM THE CARTON
1. Remove the bottle of oil from the carton.
2. Remove the packing material positioned
around the unit.
3. Lift the cultivator out of the carton and
place on a hard level surface with the
handles up.
Figure 1
HOW TO RAISE THE HANDLE
Loosen the knobs (see Figure 2). Tilt
the cultivator forward and rotate the up-
per handle to the upright position. Make
sure the throttle cable is not caught be-
tween the handles,
2. Tighten the knobs.
NOTE: To tighten the knobs, hold the
curved carriage bolt head against the out-
side of the lower handle as you tighten
the knobs.
ADJUST WHEELS OR STAKE
Set the wheels or stake in the desired posi-
tion. (See "How To Set The Depth" and the
"Cultivation Tips" in the Operation section.
._Kn Handle
obs
gure
F 041324L 6