Know Your Cultivator; Operation; Eye Protection - Craftsman 536.292524 Operator's Manual

2 horsepower 2-cycle engine 10 inch tines
Table of Contents

Advertisement

Available languages

Available languages

OPERATION
KNOW YOUR CULTIVATOR
READ THE OWNER'S MANUAL AND ALL SAFETY RULES BEFORE YOU OPERATE the
cultivator. To familiarize yourself with the location of the controls, compare the illustrations with
/our cultivator. Save this manual for future reference.
ON / OFF
Switch
Recoil Starter Handle
Throttle Control
Lever
Upper Handle
Lower Handle
Depth Stake and
Transport Wheels
Assembly
Choke Control
Air
Fuel Cap
Tine Shield
/
Tines
Figure 3
Throttle
Control
- Controls the engine
speed and the tine rotation. The cultivator is
equipped with a centrifugal
clutch that en-
gages the tine drive system when the engine
speed is increased.
Choke Control
Lever - Use to assist
when starting a cold engine.
ON / OFF Switch
- The ON position al-
lows the engine to start. The OFF position
stops the engine and keeps the engine from
starting.
Recoil
Starter
Handle
- The engine is
equipped with an easy pull recoil starter.
Compression
Release
- Before each
pull of the recoil starter handle, push the
compression
release.
Depth
Stake - Mount with the wheels up
to adjust the depth of cut. Also use to help
control the direction and speed of the
cultivator.
Transport
Wheels
- Mount with the
wheels down when transporting the
cultivator.
EYE PROTECTION
Always wear safety glasses. If you wear eye
glasses, put a Wide Vision Safety Mask over
your eye glasses.
F 041324L
,_
WARNING:
Debris thrown from
the cultivator can result in for-
eign objects
being thrown
into
the eyes, which can cause severe eye
damage. Always
wear safety glasses
or
eye shields when operating
the
cultivator.

Advertisement

Table of Contents
loading

Table of Contents