Init Display First; Reset Configuration Data; Resources Controlled By - Nvidia NFORCE 680i LT SLI User Manual

Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard

Init Display First

This function on the PnP/PCI Configuration menu allows you to define if the initial display
is in the PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx].

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or disable the
resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to
[Enabled] if you have installed a new add-on and the system reconfiguration has
caused a serious conflict that prevents the OS from booting. The default setting is
[Disabled].

Resources Controlled By

This function on the PnP/PCI Configuration menu allows you to define if the BIOS can
automatically configure all the boot and plug-and-play compatible devices or if you can
manually select IRQ, DMA, and memory base address fields. Select [Auto(ESCD)] if you
want the BIOS to automatically populate these fields. If you select [Manual] so you can
assign the resources, IRQ Resources is enabled for input.
60