Preparing The Motherboard; Installing The Cpu - Nvidia NFORCE 680i LT SLI User Manual

Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard

Preparing the Motherboard

The motherboard shipped in the box does not contain a CPU or memory. You need to
purchase a CPU, a CPU fan assembly, and memory to complete this installation.

Installing the CPU

Be very careful when handling the CPU. Hold the processor only by the edges and do
not touch the bottom of the processor.
Use the following procedure to install the CPU.
1. Remove the protective socket cover on the
load plate which is used to protect the socket
when there is no CPU installed.
2. Unhook the socket lever by pushing down
and away from the socket.
3. Lift the load plate.
4. Remove the processor from its protective
cover, making sure you hold it only by the
edges. It is a good idea to save the cover so
that whenever you remove the CPU, you have
a safe place to store it.
5. Align the notches in the processor with the
notches on the socket.
6. Lower the processor straight down into the
socket with out tilting or sliding it into the
socket.
N N o o t t e e : : Make sure the CPU is fully seated and
level in the socket.
7. Close the load plate over the CPU and press
down while you close and engage the
socket lever.
12
Align notches with notches on the CPU