Nvidia NFORCE 680i LT SLI User Manual page 38

Installing and Configuring the BFG NVIDIA nForce 680i LT SLI Motherboard
• System Monitor
Use this menu to monitor the real-time system status of your PC, including
temperature, voltages, and fan speed.
The following items on the CMOS Setup Utility main menu are commands rather
than submenus:
• Load Defaults
Load default system settings.
• Set Password
Use this command to set, change, and disable the password used to access the
BIOS menu.
• Save & Exit Setup
Use this command to save settings to CMOS and exit setup.
• Exit Without Saving
Use this command to abandon all setting changes and exit setup.
The following item on the CMOS Setup Utility main menu is a status indicator:
• SLI-Ready Memory (Status indication at bottom of screen)
This status indicator is displayed at the bottom of the BIOS screen and consists of the
following remarks:
➢
Enabled: SLI-Ready memory is detected and enabled.
➢
Disabled: SLI-Ready memory is detected but disabled.
➢
Not Detected: SLI-Ready memory is not detected.
30