Trouble Shooting - Craftsman 113.234680 Owner's Manual

(WHITE) FIELD LEAD
BLACK
FCI"(F't__.dTOT
(GRAY)BRAKE LEAD
SWITCH
(RED)FIELD LEAD
WHITE JUMPER USH
LEADS
FACING UP
3
_ BRUSH
"1
(BLACK)BRUSH LEAD I
,,
N.C,
J.4-
II
N.O.
WIRING DIAGRAM
WARNING: For your safety, this miter saw is dou-
ble insulated. To avoid electrical shock, fire, or
injury use only parts identical to those identified
in the parts list. Reassemble exactly as originally
assemb ed.
TROUBLE-SHOOTING OF BRAKE BY QUALIFIED
SERVICE PERSON ONLY:
1. Unplug the power cord. Remove brush caps and
brushes. Use ohmmeter to check for continuity from
brass brush-holder to brush-holder. If open, locate
exact place using ohmmeter. As indicated by test,
tighten a connection or replace field assembly or
replace switch,
2. If above test does not uncover a problem; then re-
place armature assembly. Armature bearing fits are
press fit on shaft and snug assembly to housing.
24
m