Type Of Cut - Craftsman 137.212371 Operator's Manual

BEVEL MITER
KEY TYPE OF CUT
SETTING SETTING
Inside corner-Left side
IL 33.9 ° 31.6 ° Right 1. Position top of molding against fence.
2. Miter table set at RIGHT 31,6 °.
3. LEFT side is finished piece.
Inside corner-Right side
IR 33.9 ° 31.6 ° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6 °.
3. LEFT side is finished piece.
Outside corner-Left side
OL 33.9 ° 31.6 ° Left 1. Position bottom of molding against fence.
2. Miter table set at LEFT 31.6 °.
3. RIGHT side is finished piece.
Outside corner-Right side
OR 33.9 ° 31.6 ° Right t. Position top of molding against fence.
2. Miter table set at RIGHT 3.t.6°.
3. RIGHT side is finished.piece.