Craftsman 137.212371 Operator's Manual page 14

UNPACKING YOUR MITER SAW
[_WARNING
To avoid injury from unexpected
starting or electrical shock, do not
plug the power cord into a source
of power during unpacking and
assembly. This cord must remain
unplugged whenever you are
working on the saw.
1. Remove the miter saw from the
carton.
IMPORTANT: Do not lift miter saw
by the trigger switch handle. It
may cause misalignment. Only lift
machine by the base hand holds.
2. Place the saw on a secure
stationary work surface.
.
Separate all parts from the packing
material. Check each one with
the illustration to make certain all
items are accounted for, before
discarding any packing material.
[AWARNING I
o If any part is missing or damaged,
do not attempt to assemble the
miter saw, or plug in the power
cord until the missing or damaged
part is correctly replaced. To
avoid electric shock, use only
identical replacement parts
when servicing double insulated
tools. Call 1=800-4=MY-HOME ®for
replacement parts.
Miter Saw
Blade Wrench Dust Bag Hold-Down Clamp Miter Handle