Craftsman 137.212371 Operator's Manual page 13

Supplied Notsupplied
Blade Wrench
Adjustable Wrench Phillips Screwdriver
Hex Wrench ..... Slotted Screwdriver
, Combination-Square--
COMBINATION SQUARE MUST BE TRUE _ .....
: L
Should not gap or overlap when square is flipped over (see dotted figure).
: - _ . -
. z .... c .
Draw light lineon Straight edge or a 3/4 in. board, this
edge must be perfectly straight.
board along this edge.
r.
4 - \
I t
I;
Should not gap or overlap when square
flipped over (see dotted figure).
13