Craftsman 137.212371 Operator's Manual page 23

o Laser beam is calibrated and set up
to project to the left of the blade.
(Fig. N-l)
® If you have any problem or question
on the laser guide, please call the
Service Center.
Fig. N-1
cutting line
"b \workplece
laser eam
® Laser Aperture Label:
AVOID EXPOSURE: Laser
radiation is emitted from this
aperture. (Fig. N-2)
AVOID EXPOSURE
Laser radiationA []
isemitted from/___,
thisaperture_'
Fig. N-2
J
laser beam
blade
I I_ cutting line
top view
_WARNHNG
® AVOID DIRECT EYE CONTACT
Laser radiated when laser guide is
turned on. Avoid direct eye
contact.
® Laser Warning Label:
Maximum output < 5 roW,
Wavelength: 630-660 rim,
Complies with 21CFR 1040.10 and
1040. 11 Class Ilia Laser Product.
(Fig. N-2)
ClassIlia Laser Product
Laser Aperture Label
Laser Warning Label
CAUTION-Use of controls or
adjustments or performance of
procedures other than those
specified herein may result in
hazardous radiation exposure.
CAUTION-The use of optical
instruments with this product will
increase eye hazard.
Do not attempt to repair or
disassemble the laser. If
unqualified persons attempt
to repair this laser product,
serious injury may result. Any
repair required on this laser
product should be performed
by authorized service center
personnel.