Effect Level - Denon AVR-1683 Operating Instructions Manual

• TO operate the surround mode and surround parameters from the remote control unit.
1
Select the surround mode for the input channel.
°'°
(Remote control unit}
The surround mode switches in the following order each time
the DSP SIMULATION button is pressed:
1
4
3
I_1
2
3
2
SURROUND
(Remote control u_it)
To enter the surround parameter setting mode, press the SURROUND PARAMETER button.
• The surround parameter switches in the following order each time the SURROUND PARAMETER button is
pressed for the different surround modes.
• ROCK ARENA
• JAZZ CLUB
• VIDEO GAME
• MONO MOVIE • MATRIX • VIRTUAL
_.DEFARO0,; S,ZE F OE_A, [_ D. C;_M,.
EFFECT [D_ULT / L;E
ULT _FAU LT
(Remote control unit)
(1) ROOM SIZE
{Remote corltrol unit)
(2) EFFECT LEVEL
{Remote corltrol unit)
Display the parameter you want to adjust, then use the (_ (left) and _) (right) buttons to set it.
je_
Use the _ (left} and _ (right} buttons to set the room size.
(Initial)
R0 0i=i :E; ]: 2:E i=iE E:, _ - - _1
,v
(left} button (right) button
Use the _ (left} and _ (right} buttons to set the effect level.
(Initial)
(left} button (right} button
41