Denon AVR-1683 Operating Instructions Manual page 11

m_m
r
I Video game
[Connecting a Video game equipment ]
• Connect tile Video ganle equipment's output iacks to this
unit's V AUX INPUT iacks
Video camera
[ --OUTP T
®® ®
VIDEO OUT
[ Connecting a Video camera equipment ]
• Connect the video camera equipment's output jacks to this
unit's V AUX INPUT iacks
The V AUX terminal is covered with a cap Remove this
cap m order to use the terminal {See page 4 for
instructions on removing the cap}
• When marking connections, also refer to the operating instructions of the other components.
• A note on the S input jacks
The input selectors for the S inputs and pin jack inputs work in conjunction with each other.
• Precaution when using S-jacks
This unit's S-jacks (input and output) and video pin jacks (input and output) have independent circuit structures, so that video signals input from
the S-jacks are only output from the S-jack outputs and video signals input from the pin jacks are only output from the pin jack outputs.
When connecting this unit with equipment that is equipped with S-jacks, keep the above point in mind and make connections according to the
equipment's instruction manuals.
DVD player, VDP, etc
....... o i£
[ Connecting a DVD player or video disc player (VDP) I
0 _ DVD/VDP
LU_
_D • Connect the DVD player's or video disc player's S-
_ Video output jack to the S-VIDEO DVDNDP IN iack
using an S-Video connection cord
Monitor TV
z_
° °° J
_D_ TV or satellite broadcast tuner
[ Connecting a monitor TV]
MONITOR OUT
• Connect the TV's or DBS tuner's S video input
(S-VIDEO INPUT) to the _ MONITOR
OUT iack using a S jack connection cord
¢_ _ * Connect the TV's or DBS tuner's S
_H_H_H_H_H_H_H_H_ H_ _ video outputjackIS-VIDEO OUTPUT)
%.., @-"
VIDEO OUT
to the _ TV/DBS IN iack using
an S jack connection cord
I Connecting the video decks I
• Connect the video deck's S output jack IS-OUT) to the
VCR IN iack and the video deck's S input jack (SqN) to the
VCR OUT iack using S jack connection cords
VIDEO IN _
Video deck
@@=
Connect the components' audio inputs and outputs as described on page 10. ]
11