Denon AVR-1683 Operating Instructions Manual page 24

[] REMOTE CONTROL UNIT
• Turn on the power of the different components before operating them.
1
Set mode switch 1 to "AUDIO".
/IUDIO•
_D
o_l[IEO m
set mode switch 2 to the position for the component to be
operated. (CD, CDR/MD or Tape deck)
CD_"D_ _ 1
W m
3
2
Operate the audio component.
• For details, refer to the component's operating instructions.
"_ While this remote control is compatible with a wide range of infrared controlled components, some models of components may not
be operated with this remote control.
1.CD player (CD) and CD recorder and MD recorder 2.Tape deck (TAPE)system buttons
(CDR/MD) system buttons
: Rewind
441, I_1_ : Manual search (forward and reverse) I_1_ : Fast-torward
• : Stop • : Stop
I_ : Play I_ : Forward play
1414, _ : Auto search (cue) _1 : Reverse play
II : Pause A/B : Switch between decks A and B
DISC : Switch discs
SKIP+ (for CD changers only)
3. Tuner system buttons
@®®
®®@
SHIFT : Switch preset channel lange
CHANNEL : Preset channel
+, - up/down
TUNING : Frequency
+, - up/down
BAND : Switch between the AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
NOTE:
• TUNER can be operated when the switch is at "AUDIO" position.
24