Oki C9200 Service Manual page 124

7 Cyclical printout defects (Figure 6.2- E )
Cycle
3.71 in. Image Drum
1.95 in. Developing Roller
2.66in. Toner Supply Roller
1.73 in. Charge Roller
4.45 in.
2.28 in. Transfer Roller
Note: After replacement of the ID unit, fuser unit or belt cassette unit, the corresponding counter
will be reset.
41388601TH Rev.2
Defective Part
Fuser Roller
Solution
Replace the ID unit.
Replace the ID unit.
Replace the ID unit
Replace the ID unit.
Replace the fuser unit.
Replace the belt cassette assembly.
124 /