Configure Date And Time; Procedure; Configure Periodic Date/Time Synchronization - HP Surestore 64 - Director Switch User Manual

Configure Date and Time

Use the procedures in this section to display and change the date and time set on the
director. You must set the current date and time on the director using this dialog box so the
correct time stamps display in the logs.

Procedure

Set the director date and time using the following steps:
1. Select Date/Time from the Configure menu.
The Configure Date and Time dialog box displays.
If the Periodic Date/Time Synchronization check box is selected, the HP EFC server
periodically synchronizes the director time to the HP EFC server, and daylight savings
time automatically updates. When the Periodic Date/Time Synchronization option is
selected, the Date and Time fields are disabled (grayed out).
If the Periodic Date/Time Synchronization check box is not selected, you can set the
HP EFC server date and time manually.
Figure 48

Configure Periodic Date/Time Synchronization

130 Configure Date and Time