New Feature Key Dialog Box - HP Surestore 64 - Director Switch User Manual

The New Feature Key dialog box displays.
Figure 46

New Feature Key Dialog Box

4. Enter the director's feature key and click OK.
– Feature keys are only valid for a director with a specific serial number. They cannot
be interchanged between directors. If an error stating "Invalid serial number"
displays, verify that you have entered the feature key that was assigned to the
director. To verify, check the serial number of the director through the Director
Properties dialog box and compare it to the serial number listed in the
documentation provided with your feature key. Refer to Displaying Director
Information on page 9 for instructions on displaying the Director Properties dialog
box.
– The feature key is a string of alphanumeric characters with dashes. The key is case-
sensitive, so enter the key exactly as printed in the documentation that you received
for the feature. If an error stating "Invalid feature key" displays, verify that you have
entered the feature key correctly.
The Enable Feature Key dialog box displays with a warning, stating that this action will
override the current set of features on the director. The list in the left column of the
dialog box is a list of features that are active on the director. The list on the right is a
set of features that come with the new feature key. All of the features that are active
are included in the new feature list.
128 Configure Feature Key