HP Surestore 64 - Director Switch User Manual page 95

•
Name
Displays the port name as configured through the Configure Ports dialog box.
•
Block Config
Indicates the blocked or unblocked configuration of the port as set through:
– The Configure Ports dialog box.
– The Block Port option available through port right-click menus in the Port Card
View, Block All Ports option on the FPM card right-click menus in the Port Card View
and Hardware View, port row right-click menus in the Port List view, and the port bar
graph right-click menus in the Performance View.
Blocked states are:
– Blocked: Devices communicating with the port are prevented from logging into the
director or communicating with other devices attached to director ports. A blocked
port continuously transmits OLS.
– Unblocked: Devices communicating with the port can log into the director and
communicate with devices attached to any other unblocked port in the same zone.
•
State
The following port operational states may display in this table. For more information
on these states and corresponding alert symbol and LED indicator operations in the
Hardware View, see Port Operational States on page 98.
– No Light
– Online
– Offline
– Beaconing
– Link Reset
– Not Operational
– Not Installed
Port List View 79