Update Software - Ericsson IP Vision Dialog 4425 User Manual

BusinessPhone – Ericsson Dialog 4425 IP Vision

Update software

If new software has to be loaded into your phone, the display is
showing this. When new application software is available, the
following display is shown:
Settings
A new version of the bootrom software
is vailable on the server, update?
Settings
A new version of the application software
is available on the server, update?
The xx indicates a timer counting down seconds. If no key is
pressed during this time (approximately. 60 seconds), "Yes" is
selected automatically. You can speed up the procedure by
pressing the Loudspeaker key
(Yes)
Press to update the software (=Yes).
The software download takes about 30 seconds, then the startup
procedure continues automatically.
Note: It is important that you do not disconnect the power
from the phone while the new software is being
downloaded and saved. If a power failure occurs, the
software must be downloaded again.
If you want to continue to use the previously stored settings:
No
Press to use the current version of the software (=No).
CallList Contacts
CallList Contacts
Start the Phone – Log On/Off
?
xx
(Yes) No
?
xx
(Yes) No
23