Firmware (Settings) - HP StorageWorks D2D100 - Backup System User Manual

WARNING!
Before shutting down always ensure that there are no backup or restore jobs in progress and that no
future jobs are scheduled to start whilst the system is shut down. If hosts do not automatically reconnect
to the HP D2D Backup System when it restarts, you must reconnect manually from the iSCSI Initiator on
each host, see

Firmware (Settings)

This page provides information about the firmware version of your HP D2D Backup System and allows
you to upgrade the firmware.
IMPORTANT:
Once you have upgraded your firmware, you will not be able to revert to the earlier version. Always read
the Release Notes accompanying the firmware upgrade carefully to check that the upgrade is compatible
with your configuration.
1.
Check http://www.hp.com/support
the Firmware page) and download it to your hard disk.
2. Read the Release Notes accompanying the firmware upgrade and confirm that it is compatible with
your D2D configuration. You will not be able to revert to earlier firmware after running the upgrade.
3.
Select Firmware from the Web Management Interface and click Upgrade.
"Targets tab" on page 52.
for the latest firmware (you can do this by selecting the link on
D2D Backup System HP D2D2503
117