Manual Jobs (Tape Attach) - HP StorageWorks D2D100 - Backup System User Manual

Manual jobs (Tape Attach)

This page provides a wizard that allows you to initiate an immediate import, export or copy operation.
• A copy operation may be performed upon any non blank cartridge in any numbered slot in a library
device on the HP D2D Backup System. The cartridge data is copied from the HP D2D Backup System
to the physical tape storage device.
• An export operation may be performed upon any non blank cartridge in the mail slot in a library
device on the HP D2D Backup System. The cartridge data is first copied from the HP D2D Backup
System to the physical tape storage device and then subsequently deleted from the HP D2D Backup
System.
• An import operation may be performed on a physical cartridge in the attached tape drive. The data
is copied to the target device on the HP D2D Backup System. The operation will automatically create
a new cartridge in the mail slot of a library device.
NOTE:
Only one copy, export or import job may be run at a time. If a job is currently in progress, a warning
message will be displayed when you try to set up the new job. You must wait for the current job to complete.
130
Using Tape Attach