Setting The Rec (Recording) Timer - JVC MX-KA3 Instructions Manual

Preparation for each music source:
Perform the following operation according to the music source
you have selected. Then, the System enters Volume Setting
mode.
When selecting TUNER FM or TUNER AM:
Press the _ or 14141 button to select the preset station
number, then press the SET butlon.
When selecting - CD - - -:
Be sure 1o specify the disc number and the track number as fob
lows.
1. Press the D,-ID.t or _ button to select the disc number, then
press the SET button.
Each time you press the button the disc number changes as
follows:
-CD "_ 1CD "_ 2CD - -" 3CD- -"*(back
to the beginning)
• If no disc number is specified, playback will start from the
first track of the currently selected disc.
2. Press the _ or I',1t<1 button to select the track number, then
press the SET button.
l_k)rexample: 2CD 12 (Disc number 2, Track number 12)
Set Daily timer CD2 after playing in CD2.
If you set Daily Timer to other CD number after playing
CD2, it will not play back at the setting time.
• If no track number is specified, playback will start from
the first track of the specified disc.
When selecting TAPE:
Insert a cassette tape you want to play into Deck A.
When selecting AUX:
Prepare the external equipment so thai it will turn on at the ON
time set by the System.
To allow this, the equipment should have the timer function.
6 Setting the volume level.
Press the _1 or 14141bullon to select the volunte level.
VOL : The current volume level will be used.
VOL-5, -1 0, or -1 5: When the timer is turned on, the Volume
will be automatically set to the selected level.
,,n, _ 15
II U I._
O_L,¢
/1\
7 Press the SET button.
The timer setting is completed, and "SET" and "OK" succes-
sively appear on the display. Then the display returns to the
display before you set the Timer.
8 Press the _/I STANDBY/ON button to turn
off the System.
The Timer indicator ( I_ ) and "DALLY" indicator are lit on the
display, showing that the Daily Timer is set to on.
To confirm / change the timer setting, repeat the setting pro_
cedure flom the beginning.
When the timer ON-time comes:
'Ihe following operation will be automatically repeated every day.
• When the timer ON-time comes, and the Sys/em automa/ically
turns on. The music source you have set is played. The Timer
indicator ((_1) blinks and "DALLY" indicator lights during
timer operation.
• When the timer OFF-time comes, "OFF" blinks on the display
.just before the OFF-time and the System automatically turns
off. Then, the Timer indicator ((_) and "DALLY" indicator
remain lit on the display.
Using the Timers
• If the System is already on when tile timer ONtime
comes, the Daily Timer does not work
Turning the Daily Timer On and Off
Once you have set the Daily Timer, it is stored in memory. So, the
Daily Timer will be activated at the same time every day until it is
canceled.
To cancel the Daily Timer temporarily:
1 Press the CLOCK/TIMER button on the Unit
repeatedly until the "TIMER" appears on the
display.
2 Press the CANCEL button on the Unit.
'Ihe "DALLY" indicator goes out and "OFF" appears on the
display.
'Ihe Timer indicator ( _l ) goes out and the Daily Timer is can-
celed temporarily.
To activate the cancelled Daily Timer:
I Press the CLOCK/TIMER button on the Unit
repeatedly until the "DAILY" appears on the
display.
'Ihe "DAILY" indicator blinks and the Timer indicator (1_)
lights up on the dispaly.
2 Press the SET button on the Unit.
"SE_I '' and "OK" successively appear on the display. The Tint-
er indicator ( _l ) and the "DAILY" indicator remain lit, and
the display returns to the original display.
CA UTION:
• If the System is unplugged, or a power failure oc-
curs, the timer setting will be lost in a few days.
You will need to reset the clock first, then the
timer.
Setting the REC (Recording)
Timer
With the Recording Timer, you can make a tape of a radio broad-
cast automatically whether or not you are home.
• You can set tile REC Timer whether the System is on or
off.
• Tile volume level is automatically set to MIN when REC
Timer is used,
• Perform each setting within approx, 30 seconds, Other_
wise, setting will be cleared and tile procedure must be
repeated from the beginning,
• If you have made a mistake while setting tile timer, press
tile CANCEL button on tile UniL However, this does not alr
ways cancel the current setting. If the CANCEL button
does not work, press the CLOCK/TIMER button on tile
Unit repeatedly until tile display returns to the original dis
play, and start from the first step.
22