Yamaha RX-V667 Owner's Manual page 105

This unit allows you to configure a multi-zone audio system. The Zone2 feature allows you to set this unit to reproduce separate input sources in the main zone and the second zone (Zone2). You can
control this unit from the second zone using the supplied remote control.
From the ZONE2 OUT jacks
Main zone
DVD player (etc.)
This unit
Amplifier
Second zone
(Zone2)
Remote control
_ Infrared signal
/
_" emitter Infraredsignal
! receiver
From the REMOTE OUT jack To the REMOTE IN jack
Usn9 ttse exe_xsa amp fe_ _
An amplifier located in the secondary zone can be connected to this unit as shown below.
Audio input
Amplifier
Second Zone
(Zone2)
Only analog signal can be sent to Zone2. If you want to output sound from Zone2, connect an
external component to AVS-6, AUDIO 1-2, or VIDEO AUX by analog connection. For example, if
you want to output sound from an HDMI DVD player in Zone2, you must connect the component to
this unit by both HDMI and analog connections.
gonnegtingZone2
You need the following additional equipment to use the multi-zone functions of this unit:
• An infrared signal receiver in the second zone.
• An infrared signal emitter in the main zone. This emitter transmits infrared signals from the remote control
to a CD player or a DVD player, etc. in the main zone via the infrared signal receiver in the second zone.
• An amplifier and speakers in the second zone.
Since there are many possible ways to connect and use this unit in a multi-zone configuration, we
recommend that you consult with your nearest authorized Yamaha dealer or service center about the
Zone2 connections that best meet your requirements.
To avoid unexpected noise, DO NOT USE the Zone2 feature with CDs encoded in DTS.
Connect the speakers in the second zone to the EXTRA SP jacks directly (_).
Usn9 5'{ES/{OTE N/OUT scks fo__ mut o, zo_se components
This unit is equipped with REMOTE IN and REMOTE OUT jacks. You can use these jacks to control
this unit and other components from Zone2 (_).
Some Yamaha models can be directly connected to the REMOTE jacks of this unit. These models
may not require an infrared signal emitter. Up to 6 Yamaha components can be connected as shown
below.
REMOTE REMOTE REMOTE
IN OUT IN OUT
Infrared signal This unit Yamaha
receiver component
En
105