EPSON Perfection 610
4.2.8 Panel Board Removal
1. Release the Carriage Lock. (See Section 4.2.1.)
2. Remove the Document Cover. (See Section 4.2.2.)
3. Remove the Upper Housing. (See Section 4.2.3.)
4. Remove the screw (gold, CBS, M3x4).
In the following steps, manually move the carriage
back and forth slowly if necessary.
5. Disconnect the locking connector (pull and release) for the Panel
Board from the Power Supply Board, and then remove the Panel
Board.
Assembly and Disassembly
Connector
Disassembly Procedures
CBS Screw (M3x4)
Panel Board
Figure 4-30. Panel Board Removal
Revision B
40