Panel Board Removal - Epson GT-7000 Service Manual

Hide thumbs Also See for GT-7000:

Table of Contents

EPSON GT-7000

4.2.8 Panel Board Removal

1. Release the carriage lock. (See Section 4.2.1)

2. Remove the document cover. (See Section 4.2.2)

3. Remove the upper cover. (See Section 4.2.3)

4. Remove one gold screw(CBS, 3x5), and the shield board for the

panel board.

C A U T I O N

In the next steps, move the carriage back and forth

slowly by hand, according to your necessity.

5. Remove the panel board from the scanner body.

6. Disconnect the connector(lock type; pull and release) of the panel

board from the power unit, then remove the panel board.

Rev. A

Chapter 4

Disassembly and Assembly

S h i e l d B o a r d f o r

C B S ( M 3 x 5 )

P a n e l B o a r d

Figure 4-28. Panel Board Removal(1)

C o n n e c t o r

P a n e l B o a r d

Figure 4-29. Panel Board Removal

Table of Contents