Disassembly And Assembly; Bottom Plate Removal; B035 Power Supply Board Removal - Epson GT-9000 Service Manual

Color imaging scanner

Hide thumbs Also See for GT-9000:

Table of Contents

EPSON GT-9600

3.1 Disassembly and Assembly

This section explains disassembly procedure of GT-9600. Since the

components of GT-9500 and GT-9600 are basically same, items only

for GT-9600 are explained here.

1. Remove 17 screws(CBB, 3x12) and 2 screws(CBS, 3x6) securing

"Bottom Plate" to "Housing, Lower".

2. Remove "Bottom Plate" from "Housing, Lower".

CBB (3x12)

CBB(3x12)

Figure 3-1. Bottom Plate Removal

Disassembly and Assembly

1. Remove "Bottom Plate". (See "Bottom Plate Removal" on page -14)

2. Disconnect harness from the connectors on the B035 power supply

board.

3. Remove 5 screws (CBB, 3x12) securing B035 power supply board

to "Housing, Lower".

4. Remove B035 power supply board from "Housing, Lower".

CBS

(3x6)

Housing Lower

Figure 3-2. B035 Power Supply Board Removal

Disassembly and Assembly

Power Supply

CBB(3x12)

Cable

Harness to

B077Main Board

Harness to the

LED Board

Revision A

Table of Contents