Table of Contents
Advertisement
Option Settings
Setting 4: TEL/FAX REMOTE NUMBER (TRANSFER CODE)
If you hear a fax tone when you answer a call on a tone dial extension
phone connected to the same line as the fax, you can make the fax begin
reception by pressing 5, *, and * on the phone. Use this setting if you
want to use a number other than 5 to begin fax reception. You can enter
any number from 0 to 9.
•
Initial setting: 5
FUNCTION
Enter a number
from 0 to 9
Setting 5: REMOTE RECEPTION SELECT
If you don't intend to use the above TEL/FAX REMOTE NUMBER,
you can turn detection of the number off. This will ensure that the fax
never mistakenly attempts to begin reception if it detects a signal similar
to the TEL/FAX REMOTE NUMBER while you are talking on an
extension phone. Press 1 to turn detection on, or 2 to turn detection off.
•
Initial setting: 1
FUNCTION
YES
1
94
4
Press
REMOTE RECEPTION
4
Press
NO
or
2
TRANSACTION LIST
until
display
TEL/FAX REMOTE #
shows:
until
display
REMOTE RECEPTION
shows:
STOP
STOP
Advertisement
Table of Contents
