Table of Contents
Advertisement
Loading Printing Paper
4
Push the paper release plate back down.
Note: When receiving faxes or copying documents, do not allow a large
number of pages to accumulate in the output tray. This may obstruct the
outlet and cause paper jams.
Note: If the display shows the following alternating messages when
making a copy or receiving a fax, check the paper tray. If the tray is empty,
add paper and then press the START/MEMORY key. If there is paper,
make sure it is inserted correctly and then press the START/MEMORY
key.
SET PAPER &
5
Your fax has been set at the factory to print at normal contrast.
Depending on the type of paper you have loaded, you may find that
you obtain better print quality by changing the setting to LIGHT.
Press these keys:
The display will show:
Press 1 to select NORMAL or 2 to select LIGHT.
The display will show:
Press the STOP key to return to the date and time display.
24
FUNCTION
6
PRINT CONTRAST
NORMAL
LIGHT
or
1
2
COPY CUT-OFF
STOP
If the paper
release plate is
not pushed down,
paper feed errors
will result.
PRESS START KEY
Advertisement
Table of Contents
