Receiving Documents; Using Tel/Fax Mode - Sharp FO-785 Operation Manual

Hide thumbs Also See for FO-785:
Table of Contents

Advertisement

3
Receiving
Documents

Using TEL/FAX Mode

When the reception mode is set to TEL/FAX, your fax automatically
answers all calls on 2 rings. After answering, your fax monitors the
line for about 5 seconds to see if a fax tone is being sent.
If your fax detects a fax tone (this means that the call is an
automatically dialled fax), it will automatically begin reception of
the incoming document.
If your fax doesn't detect a fax tone (this means that the call is a
voice call or manually dialled fax), it will make a ringing sound
(called pseudo ringing) for 15 seconds to alert you to answer. If
you don't answer within this time, your fax will send a fax tone to
the other machine to allow the calling party to send a fax manually
if they desire.
Comments:
• • • •
Only the fax will alert you to voice calls or manually dialled faxes by pseudo
ringing. An extension phone connected to the same line will not ring after the
connection has been made.
• • • •
The duration of pseudo ringing can be adjusted with Option Setting 8. See
Chapter 8, Option Settings.
• • • •
You can change the number of rings on which the machine answers calls by
changing Option Setting 2. (See Chapter 8, Option Settings.)
52
RECEPTION
MODE
Press the
RECEPTION MODE
key until the arrow in
the display points to
TEL/FAX.
TEL/FAX
FAX
TEL
A.M.

Advertisement

Table of Contents
loading

Table of Contents