Table of Contents
Advertisement
♦
If Option Setting 17 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
♦
All information is erased after a report is printed out. If automatic
print-out is disabled and print-out has not been performed
manually for 30 operations, the information on the oldest
operation will be overwritten each time a new operation is
performed.
Explanation of headings
The fax number of the other machine involved in the transaction. In
SENDER/
RECEIVER
the case of a transmission, the number dialled appears. In the case of
a reception, the programmed ID of the sending machine appears. If
this machine does not have an ID function, the communication mode
will appear (for example, "G3").
Number of pages transmitted or received.
PAGES
OK - Transmission/reception was normal.
NOTE
P.FAIL - A power failure occurred. If you have power and the
problem persists, try a different outlet. If necessary, have an
electrician check your power lines.
JAM - A problem with the paper or original document occurred.
Make sure the paper or document is loaded properly. Make sure the
operation panel is shut securely.
NO PAPER - You ran out of paper during reception.
Printing Reports and Lists
101
Advertisement
Table of Contents
