Removing Misfeeds; Original Misfeed In The Spf - Sharp AR-M161 Operation Manual

Digital multifunctional system
Hide thumbs Also See for AR-M161:
Table of Contents

Advertisement

REMOVING MISFEEDS

When a misfeed occurs during copying, the message "
Check the location and remove the misfeed.
The paper may tear when you remove a misfeed. In this event, be sure to remove all torn pieces of paper from
Note
the machine, taking care not to touch the photoconductive drum (the green part). Any scratches or damage to
the surface of the drum will cause dirty copies.
First check the misfeed location.
(Page 31)
(Page 33)
(Page 34)
* The illustration shows misfeed locations in the AR-M206/AR-M207 (when the RSPF is installed).

ORIGINAL MISFEED IN THE SPF

If an original misfeeds in the SPF, follow the steps below to remove the misfed original.
1
Removing original misfeeds from
each location.
• Check location A
Open the feeding roller cover
Feeding roller cover
and gently remove the misfed
original from the document
feeder tray. Close the feeding
roller cover.
• Check location B
Open the SPF and rotate the
two release rollers in the
direction of the arrow to feed the
original out.
Release rollers
If the misfed original is small
Right side cover
(such as an A5 (5-1/2" x 8-1/2")
original), or if the misfeed
occurred in the reversing tray,
open the right side cover and
gently remove the original.
Close the right side cover.
Clear paper path." and the location of the misfeed will appear.
(See below)
(Page 31)
(Page 34)
(Page 30)
(Page 34)
(Page 34)
Check locations A, B, and C in the diagram at left to
remove the original.
• Check location C
Reversing tray
After removing a misfed original from the exit area,
be sure to replace the reversing tray and moveable
part of the document feeder tray.
Misfeed locations in the optional
2 x 250-sheet paper feed unit
Carefully remove the misfed
original from the exit area.
[When using the RSPF:]
If the misfed original cannot be
easily removed from the exit
area, open the moveable part of
the document feeder tray,
remove the reversing tray, and
then remove the original.
(Page 34)
(Page 34)
2
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ar-m162Ar-m165Ar-m206Ar-m207

Table of Contents