Waste Mode - Sharp UP-3301 Instruction Manual

WASTE mode

This mode is used to throw away an article which has already been prepared and is no longer serviceable.
Procedure
WASTE
NOTE
• PLU entries are only allowed in the WASTE mode, and direct and indirect void operations are also allowed
in this mode.
• When a WASTE-mode transaction is finalized, the drawer does not open.
• The consecutive number is incremented every WASTE-mode transaction.
• When the WASTE mode is activated by touching the
Example
Key Operation
88
[Item registration]
WASTE mode
WASTE
000010
000011
WASTE
WASTE
key, the mode caption "WASTE" is displayed.
WASTE
Display
Mode caption