Drive-Through Code Programming; Drive-Through Code - Sharp UP-3301 Instruction Manual

Drive-through Code Programming

Use the following procedure to select the menu option "15 DRIVE THRU":
I Drive-through code
You can program the range of available drive-through codes.
Procedure
M
Program each item as follows:
• START CODE (Use the numeric entry)
Starting drive-through code (max. 8 digits: 1 to 99999999)
• END CODE (Use the numeric entry)
Ending drive-through code (max. 8 digits: 1 to 99999999)
• TIME (Use the numeric entry)
Drive-through target time:
Enter the minute (2 digits) and the second (2 digits) in this
sequence.
NOTE
When the customer's waiting time is over the programmed
target time, the terminal will display a warning.
211