Power Source - Sharp MD-MS722H Operation Manual

POWER SOURCE

This unit can be used with 4 different power sources: a rechargeable battery, an AC
adaptor, a battery case, and a separately available car adaptor (AD-CA20X).
1
2
4
To the DC
IN 5V
socket
DC IN 5V
Insert
securely,
all the
AC 230-240V, 50/60 Hz
way in.
Notes:
After charging has been completed, the
AC adaptor may be left connected.
(For example, when charging at night)
If the rechargeable battery is in the unit,
it will be charged, even whilst operating
the unit. (Float charge)
Rechargeable battery power
When the rechargeable battery is used for
the first time or when you want to use it
after a long period of disuse, be sure to
charge it fully.
1
Open the rechargeable battery com-
partment cover.
2
Insert the rechargeable battery.
Insert the side with the arrow first.
Mark
3
Close the rechargeable battery com-
partment cover.
4
Plug the AC adaptor into the AC
socket, and then insert the plug on the
AC adaptor lead into the DC IN 5V
socket.
About 4 seconds later, "
and the battery will begin charging.
Battery charging will be complete in 3.0
hours. When the charging is com-
plete, " " will go out.
Do not force open the rechargeable
battery cover too wide.
When the AC adaptor plug is inserted
and a MiniDisc has already been in-
serted, playback may start automati-
cally.
In this case, press the
twice to turn the power off.
7
" will flash,
/ :OFF button
MD-MS722H(SUK)