Speaker Connection - Sharp XL-MP100H Operation Manual

" Speaker connection

Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Caution:
! Connect the speaker wires to the speakers first, then to the
unit.
! Use speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
! Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
! Do not stand or sit on the speakers. You may be injured.
! Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
! Do not let the bare speaker wires touch each other.
Incorrect
Placing the speaker system:
There is no distinction between the right and the left speakers.
Speaker grilles are removable:
Make sure nothing comes into contact with the
speaker diaphragm when you remove the
speaker grilles.
" Connecting the AC power lead
After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Wall socket
(AC 230 - 240 V, 50 Hz)
Notes:
! Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
! Never use a power lead other than the one supplied. Otherwise, a
malfunction or an accident may occur.
Incorrect
" To turn the power on
Press the ON/STAND-BY button to
turn the power on.
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
04/1/28 XL-MP100H(A)1.fm
TINSEA014SJZZ
XL-MP100H
2
9